Helicopter Aerodynamics - Retreating Blade Stall
There are a number of dangerous situations for helicopters and other aircraft that use rotors. One such situation is known as retreating blade stall. This is where the rotor blades traveling away from the direction of flight enter a stalled condition.
This is caused by a combination of fairly low airspeed, and/or the angle of attack being too large. Retreating blade stall is what limits the speed at which helicopters are able to fly, even the fastest helicopters can only fly at around 200 knots.
Rotor blades travel in a circular movement, and so some of them will be traveling in the direction of travel (advancing) and some will be moving away (retreating blade).
The majority of helicopter designers have overcome this problem somewhat by allowing a certain amount of flex in the blades.
The blades flex during the advance of the blades. This means that the angle of attack is much lower. The blades flex down when the blades retreat which increases the lift and angle of attack.
The cyclic pitch control can also be used to increase the pitch of the retreating blades and also decrease the pitch of the advancing blades. This make is possible to generate more lift and balance out the effects of advancing and retreating blades.
Failure
\r The compensations built into the modern helicopter designs they can only reduce the effects, not completely eradicate it. Its possible for helicopters to move too fast, which means that the retreating blades do not provide enough lift. This results in retreating blade stall.
Performance
\r As a helicopter reaches the airspeed where retreating blade stall will occur, the helicopter will begin to shake and the noise will get louder. If the nose is pulled upwards the condition can be corrected as the helicopter will begin to slow down. If this condition is not corrected in time the helicopter is likely to roll over.
Causes
\r Retreating blade stall can occur much easier when one or more of the following conditions are met. The more conditions that are present the more likely that retreating blade stall will become a problem.
Things that can make retreating blade stall more of an issue include turbulent air, low speed RPM of the rotors, abrupt turning, or high airspeed.
Few of these factors are due to pilot error. It is particularly important that all helicopter pilots know how to correct this should it ever arise.
At Helicopter Pilot Careers we help helicopter pilots land their dream jobs. Come see us and get our free report on the state of the helicopter industry, a free e-logbook, and free resume advice!
Ensuring Safety Around the Helicopter
What you know and you dont know about safety around helicopter could make a big difference.Here are some important informatio...
5 Types of Remote Control Helicopter
If you are thinking of what particular remote control helicopter to buy, then this article should help.Here are the different...
Between Gas and Electric R C Helicopter
Rc helicopter has become one of the more popular boy toys that hit and hit big. Its popularity is not surprising at all. Imag...
Helicopter Flight Training
Helicopter flight training, like fixed-wing (airplane) flight training, is expensive. Its also more demanding in some ways th...
Helicopter Controls
The pilot of a helicopter controls the machine using a series of flight controls in order to change various aspects of flight...
Helicopters for Sale
Helicopters are expensive; therefore, it is important for organizations to make a decision only after reviewing the product t...
Cone Shaped Undercarriage Ground Cushion for Rotor Craft
Helicopters have become part of modern life in the world. They are able to help us watch the news, move executives around and...
Aerodynamic Inflatable Wing Gates for STOL
Low speed flight characteristic are crucial to safety. Those aircraft that have good flight characteristics at low speeds are...
Understanding Airplanes - 10 Things All Pilots Should Know
An airplane flies on its wings. The wings produce a force that keeps the plane aloft, known as lift.Lift opposes gravity and ...
Buying and Selling Bell Helicopters
Anyone who is even remotely associated with the aircraft industry is likely to have heard about the Bell helicopters. This is...
Helicopters Outfitted With Airbags
You know those airbags in your car? Did you know they are very similar in nature to the airbags deployment system used to cra...
Everything You Ever Wanted To Know About Helicopters
The dictionary defines a helicopter as an aircraft that flies by means of horizontally rotating blades. It is derived from th...
Helicopter Pilot Training
When one talks of flying in any context, one of the most interesting aircraft to fly is the helicopter. Unlike other aircraft...
Possible Aviation Topics for a Think Tank
We often here about Think Tanks in the news, but what do they really do? What problems do they solve and what do they think a...
The UH-60 Black Hawk
The UH-60 Black Hawk helicopters first flight was in Oct 17 1974. This was, 2 years after when the US Army commissioned the S...
Limited Power Operations For Helicopters
Performance planning is an important part of flying a helicopter. Under certain atmospheric conditions the power available fr...
The Eurocopter EC-145
The Eurocopter EC-145 is becoming a frequent site in the skies of the United States and the world. Its responsiveness and ver...
Material Memory and NASA High Tech Plastics for Rotor Blades
Some new materials, types of plastics seem to be stronger than steel by quite a bit. Since they are made of polymer plastic b...
Heavy Lift Helicopters - The Sikorsky CH-54 Tarhe
The CH-54 Tarhe was a heavy lift helicopter built by Sikorsky. It was designed for external lifting of heavy and bulky loads....
Modern Helicopters - The MD-600N
The MD-600N, built by MD Helicopter, is an eight passenger, light, utility helicopter. The MD-600N first flew in January of 1...